Description
The BOOST FX boost/EGT meter
combines the convenient mounting and packaging of a
conventional analog meter with the latest
microprocessor based digital technology. Fitting
into a standard 2 -1/16“ hole this meter offers a
simultaneous digital display of two Meters, Turbo
Boost/Exhaust Gas. Even though it is small in size
the high contrast, wide temperature range LCD makes
it easy to read even at a glance. In low light or
nighttime situations eight (8) high intensity LED’s
provide a bright and evenly lit backlight. In
addition to the dual displays, the Boost FX also
provides a peak hold and a real time data-logging
feature. These features allow the user to capture
either peak readings or continuous data over a given
run so that the data can be played back in real time
after the run.
All these features are controlled by a toggle switch
that can be mounted on your instrument panel. To
simplify function selection, the LCD has custom
enunciators that tell the user what mode the meter
is in as each function is selected.
Operation
Normal Mode - Under normal
operation the meter continuously displays both
channels. If one or both of the channels goes above
a preset limit the appropriate channel(s) will
flash. The factory default EGT setting is 1250. |
Features
-
Dual BOOST/EGT
Display
-
High Contrast
LCD with backlight
-
Peak Hold
Capability
-
Data Logging
with Real-Time 30 Second Playback
-
High Accuracy
±5 Wide Voltage Input Range
-
Display
Flashes at User Defined Overage Setting
|
Logging Mode - This meter can be
set to record data in a high speed sampling mode for a 30
second interval. It is triggered when the toggle switch is
depressed and will continue until the 30 second period
expires. The data can be played back in real time and is
kept in non-volatile memory until the user clears the memory
or begins a new run. During a data logged run, all display
functions are operable so that if a reading goes too high,
it can be monitored and the run stopped.
Specifications Input:
One (1) type “K” T/C input
32°F to 1800°F or 0° to 815°C
One (1) Pressure Transducer 0-200 PSI
Screw terminal connections
Power: 12 VDC
Accuracy: ± 5 counts over entire range (10 bit A/D)
Display Update Rate: 5 readings/Sec minimum
Resolution: 1 F/1 C- lbs/ .1bar Factory configurable
Temperature: Storage -40
Case: metal, Black Sealing: O-ring and gasket.
Weather resistant
Window: Anti-fog glass
Mounting: U-clamp, standard 2-1/8” round hole
KIT INCLUDES: Gauge, Thermocouple, Transducer,
Harness, Pyropower Pac and Mounting Kit
Replacement items sold separately
Thermocouple - 1 required per meter
Pressure Transducer - 1 required per meter
|
Suggested Cost
$449.00
Your Cost
$429.00
|
|
