Description
The FURY FX EGT/RPM meter combines
the convenient mounting and packing of a
conventional analog meter with the latest
microprocessor based digital technology. Fitting
into a standard 2 1/16" hole this meter offers a
digital simultaneous display of ONE Type K EGT input
and wide temperature range LCD makes it easy to read
even at a glance. In low light or nighttime
situations eight (8) high intensity LED's provide a
bright and evenly lit backlight. In addition to the
dual display, the FURY FX also provides a peak hold
and a real time data-logging feature. These features
allow the user to capture either peak readings or
continuous data over a given run so that the data
can be played back in real time after the run.
All these features are controlled by a toggle switch
that can be mounted on your instrument panel. To
simplify function selection, the LCD has custom
enunciators that tell the user what mode the meter
is in as each function is selected.
Operation
Normal Mode - Under normal
operation the meter continuously displays both EGT
and RPM channels. If one or both of the channels
goes above a preset limit the appropriate channel(s)
will flash. The factory default setting is 1250°F
(675°C) but can be changed by in 50°F increments by
the user. Also in normal operation mode the peak EGT/RPM
readings are stored. The peak memory is
automatically reset when power is reset. |
Features
-
Single EGT/RPM
Display
-
High Contrast
LCD with backlight
-
Peak Hold
Capability
-
Data Logging
with Real-Time 30 Second Playback
-
High Accuracy
±5°F or Better
-
Wide Voltage
Input Range
-
Display
Flashes at User Defined Overage Setting
|
