Description
The Inferno EGT meter combines the
convenient mounting and packing of a conventional
analog meter with the latest microprocessor based
digital technology. Fitting into a standard 2 1/16"
hole this meter offers a digital simultaneous
display of Two Type K EGT inputs. Even though it is
small in size the high contrast wide temperature
range LCD makes it easy to read even at a glance. In
low light or nighttime situations eight (8) high
intensity LED's provide a bright and evenly lit
backlight. In addition to the dual temperature
display, the Inferno also provides a peak hold and a
real time data-logging feature. These features allow
the user to capture either peak readings or
continuous data over a given run so that the data
can be played back in real time after the run.
All these features are controlled be a toggle switch
that can be mounted on your instrument panel. To
simplify function selection, the LCD has custom
enunciators that tell the user what mode the meter
is in as each function is selected.
Operation
Normal Mode - Under normal
operation the meter continuously displays both EGT
channels. If one or both of the channels goes above
a preset EGT limit the appropriate channel(s) will
flash. The factory default setting is 1250°F (675°C)
but can be changed by in 50°F increments by the
user. Also in normal operation mode the peak EGT
readings are stored. The peak memory is
automatically reset when power is reset. |
Features
-
Dual EGT
Display
-
High Contrast
LCD with backlight
-
Peak Hold
Capability
-
Data Logging
with Real-Time 30 Second Playback
-
High Accuracy
±5°F or Better
-
Wide Voltage
Input Range
-
Display
Flashes at User Defined Overage Setting
|
